|
DISINFEXIT 10 - THE COMPLETE SOLUTION
DISINFECTANT - NO RINSE SANITIZER † - DEODORIZER - MILDEWSTAT (HARD INANIMATE SURFACES) DISINFEXIT 10 is a fragrance free, colorless, concentrate quaternary ammonium solution used as a DISINFECTANT - NO RINSE SANITIZER - DEODORIZER- MILDEWSTAT. When used as directed, DISINFEXIT 10 is a broad-spectrum virucidal hard surface disinfectant that is expected to inactivate the SARS-CoV-2 (the virus that causes COVID-19). DISINFEXIT 10 is designed specifically for hospitals, public places / institutions, food processing plants, dairies, restaurants, bars, animal quarters, kennels where disinfection, sanitization and deodorisation is of prime importance. When used as directed, this product is formulated to disinfect precleaned inanimate, hard surfaces such as walls, floors, sink tops, tables, chairs, and bed frames. This product deodorizes those areas which generally are hard to keep fresh smelling, such as garbage storage areas, empty garbage bins and cans, pet areas and any other areas which are prone to odours caused by microorganisms. DISINFEXIT 10 is to be used with a mop and bucket, sponge, cloth, low pressure coarse sprayer, hand pump trigger sprayer or by soaking. It is a violation of Federal Law to use DISINFEXIT 10 in a manner inconsistent with its labeling. DISINFEXIT 10 is not to be used as a terminal sterilant high-Ievel disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. DISINFEXIT 10 is not for use on critical and semi-critical medical device surfaces. DIRECTIONS DISINFECTION - Pre-clean inanimate, hard surfaces with a reliable detergent or a RM Chemical recommended product. Dilute DISINFEXIT 10: 5.50 mL /1 Litres of potable water (550ppm concentration). 11.0 mL /2 Litres of potable water (550ppm concentration). 16.5 mL / 3 Litres of potable water (550ppm concentration). 22.0 mL / 4 Litres of potable water (550ppm concentration). Apply product with mop, cloth, sponge or coarse (trigger) spray so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove excess liquid. Prepare a fresh solution for each use. HOSPITAL / HEALTH CARE DISINFECTION - Add 22 mL of DISINFEXIT 10 per 4 Litres of potable water (550 ppm concentration) for disinfection against Pseudomonas aeruginosa and Vancomycin intermediate resistant Staphylococcus aureus (VISA). DISINFEXIT 10, when used on pre-cleaned environmental inanimate hard surfaces at 550 ppm exhibits effective virucidal activity against Influenza A2/Japan, herpes Simplex Type 1, Adenovirus Type 5, Vaccinia virus, and Avian influenza A /Turkey / Wisconsin, Human Immunodeficiency Virus Type 1 (HIV-1), Newcastle disease virus, Laryngotracheitis Virus, Porcine Respiratory and Reproductive Syndrome virus. DISINFEXIT 10 has demonstrated effectiveness against Vaccinia and Influenza A virus and is expected to inactivate all Influenza A viruses including 2009 (H1N1) pandemic Influenza A virus. |
HOSPITAL / HEALTH CARE DISINFECTION
EFFICACY TESTS HAVE DEMONSTRATED THAT DISINFEXIT 10 IS AN EFFECTIVE BACTERICIDE AND VIRUCIDE IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM). KILLS HIV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS
In health care settings (Hospitals, Nursing Homes) or other settings which there is an expected likelihood of soiling in inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1).
Special instructions for cleaning and decontamination against HIV-1 on surfaces soiled with blood/body fluids.
Personal Protection: When handling items soiled with blood or body fluids use disposable latex gloves, gowns, masks, or eye coverings.
Cleaning Procedures: Target surfaces must be cleaned prior to disinfection, as the presence of heavy soil on a surface may reduce the intended disinfectant efficacy of the product. Contact Time/Concentration: At a use dilution of 32.5 mL per 4 L of potable water (806 ppm) DISINFEXIT 10 is effective against HIV-1 in the presence of 5% blood serum with a 10 minute contact time.
Infectious Materials Disposal: Any materials used in the cleaning process that may contain blood or body fluids are to be disposed of immediately in accordance with local regulations for infectious materials disposal.
SANITIZATION FOOD CONTACT SURFACES
For use in restaurants, dairies, food processing plants, and bars. When used as directed DISINFEXIT 10 is an effective sanitizer against Escherichia coli, Yersinia enterocolitica, and
Staphylococcus aureus and E. coli 0157:H7, Shigella sonnei (ATCC 11060), Vibrio cholera (ATCC 14035), Methicillin resistant Staphylococcus aureus (MRSA) (ATCC 33592), Vancomycin resistant Enterococcus faecalis (VRE) (ATCC 51299), Klebsiella pneumoniae (ATCC 4352), Listeria monocytogenes (ATCC 35152), Salmonella typhi (ATCC 6539), campylobacter jejuni (ATCC 29428).
SANITIZATION DIRECTIONS
Remove all gross food particles and soil from areas which are to be sanitized with good detergent, pre-flush, pre-soak or pre-scrape treatment. Rinse with a potable water rinse.
To sanitize pre-cleaned and potable water-rinsed, non-porous, food contact surfaces, prepare a 200 ppm active quaternary solution by adding 8 mL DISINFEXIT 10 to 4 Litres of potable water.
2.0 mL / 1 Litres of potable water (200 ppm concentration). 4.0 mL / 2 Litres of potable water (200 ppm concentration). 6.0 mL / 3 Litres of potable water (200 ppm concentration). 8.0 mL / 4 Litres of potable water (200 ppm concentration).
To sanitize immobile items such as tanks, chopping blocks and counter tops, flood the area with 200 ppm active DISINFEXIT 10 solution for at least 60 seconds making sure to wet all surfaces completely. Remove, drain the use solution from the surface and air dry. Prepare a fresh solution daily or more frequently as soil is apparent.
EFFICACY TESTS HAVE DEMONSTRATED THAT DISINFEXIT 10 IS AN EFFECTIVE BACTERICIDE AND VIRUCIDE IN THE PRESENCE OF ORGANIC SOIL (5% BLOOD SERUM). KILLS HIV ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS
In health care settings (Hospitals, Nursing Homes) or other settings which there is an expected likelihood of soiling in inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1).
Special instructions for cleaning and decontamination against HIV-1 on surfaces soiled with blood/body fluids.
Personal Protection: When handling items soiled with blood or body fluids use disposable latex gloves, gowns, masks, or eye coverings.
Cleaning Procedures: Target surfaces must be cleaned prior to disinfection, as the presence of heavy soil on a surface may reduce the intended disinfectant efficacy of the product. Contact Time/Concentration: At a use dilution of 32.5 mL per 4 L of potable water (806 ppm) DISINFEXIT 10 is effective against HIV-1 in the presence of 5% blood serum with a 10 minute contact time.
Infectious Materials Disposal: Any materials used in the cleaning process that may contain blood or body fluids are to be disposed of immediately in accordance with local regulations for infectious materials disposal.
SANITIZATION FOOD CONTACT SURFACES
For use in restaurants, dairies, food processing plants, and bars. When used as directed DISINFEXIT 10 is an effective sanitizer against Escherichia coli, Yersinia enterocolitica, and
Staphylococcus aureus and E. coli 0157:H7, Shigella sonnei (ATCC 11060), Vibrio cholera (ATCC 14035), Methicillin resistant Staphylococcus aureus (MRSA) (ATCC 33592), Vancomycin resistant Enterococcus faecalis (VRE) (ATCC 51299), Klebsiella pneumoniae (ATCC 4352), Listeria monocytogenes (ATCC 35152), Salmonella typhi (ATCC 6539), campylobacter jejuni (ATCC 29428).
SANITIZATION DIRECTIONS
Remove all gross food particles and soil from areas which are to be sanitized with good detergent, pre-flush, pre-soak or pre-scrape treatment. Rinse with a potable water rinse.
To sanitize pre-cleaned and potable water-rinsed, non-porous, food contact surfaces, prepare a 200 ppm active quaternary solution by adding 8 mL DISINFEXIT 10 to 4 Litres of potable water.
2.0 mL / 1 Litres of potable water (200 ppm concentration). 4.0 mL / 2 Litres of potable water (200 ppm concentration). 6.0 mL / 3 Litres of potable water (200 ppm concentration). 8.0 mL / 4 Litres of potable water (200 ppm concentration).
To sanitize immobile items such as tanks, chopping blocks and counter tops, flood the area with 200 ppm active DISINFEXIT 10 solution for at least 60 seconds making sure to wet all surfaces completely. Remove, drain the use solution from the surface and air dry. Prepare a fresh solution daily or more frequently as soil is apparent.
